MUTEC MC-1.1+ - Manual (Page 20)

\\\\\\\\\\\\
AP P E N D I X AP P E N D I X AP P E N D I X
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
Manual SDs-01 E 3.2.2003 18:26 Uhr Seite 14
20
Technical Data
S/P-DIF OPTICAL AUDIO INPUT (OP)
Interfaces
1 x Toshiba Toslink TM , EIAJ RC-5720
Format, Resolution IEC 60958, 16 – 24 bits
Lock range 22.0kHz to 216.0kHz
S/P-DIF COAXIAL AUDIO INPUT (CO)
Interface
1 x Coaxial (Cinch/RCA female), unbalanced, input impedance 75 Ω, 200 mV –7 V
Format, Resolution IEC 60958, 16 – 24 bits
Lock range 22.0kHz to 216.0kHz
AES3 AUDIO INPUT
Interface
1 x XLR female, transformer balanced, input impedance 110 Ω, 200 mV – 7.0 V
Format, Resolution AES/EBU 3 – 1992/2003 + AES/EBU 11 – 1997/2003, 16 – 24 bits
Lock range 22.0kHz to 216.0kHz
AES3id AUDIO INPUT
Interface
1 x BNC, 200 mV-7 V, unbalanced, input impedance 75 Ω
Format, Resolution AES3id – 1995/2001, 16 – 24 bits
Lock Range 22.0kHz to 216.0kHz
S/P-DIF OPTICAL AUDIO OUTPUT (OP)
Interface
1 x Toshiba Toslink TM , EIAJ RC-5720
Format, Resolution IEC 60958, 16 – 24 bits
Transmitted audio clock rates 22.0kHz to 216.0kHz
S/P-DIF COAXIAL AUDIO OUTPUT (CO)
Interface
1 x Coaxial (Cinch/RCA female), unbalanced, 0.5 Vpp @ 75 Ω, output impedance 75 Ω,
buffered
Format, Resolution IEC 60958, 16 – 24 bits
Transmitted audio clock rates 22.0kHz to 216.0kHz
AES3 AUDIO OUTPUT
Interface
1 x XLR male, transformer balanced, 3.5 Vpp @ 110 Ω, output impedance 110 Ω, buffered
Format AES/EBU 3 – 1992/2003 + AES/EBU 11 – 1997/2003, 16 – 24 bits
Transmitted audio clock rates 22.0kHz to 216.0kHz
AES3id AUDIO OUTPUT
Interface
1 x BNC, 1.0 V, unbalanced, input impedance 75 Ω
Format, Resolution AES3id – 1995/2001, 24 bits
Transmitted Clock Rates 22.0kHz to 216.0kHz
SIGNAL PROCESSING
Digital Audio Format
Conversion
AES3, AES3id, S/P-DIF (optical + coaxial) in every combination and direction
SCMS copy bit Generation of original, 1st generation, SCMS pass-thru functionality
S/P-DIF signal analyzing Automatic detection of SCMS original + 1st generation status; none-PCM and DTS detection
POWER SUPPLY
Type
Internal, switching power supply
Input voltage 90 V – 264V (automatic adjustment), 47Hz – 440Hz
Power consumption max. 10 W
SYSTEM UNIT COVER
Cover size / material / color
196 x 42 x 156mm without connectors (W x H x D), aluminium sheet 1mm, black
Front panel size / material 198 x 44 x 2mm (W x H x D), aluminium
Weight ~ 650g