MUTEC MC-1.1+ - Manual (Page 16)

\\\\\\\\\\\\
O P E RAT I O N O P E RAT I O N O P E RAT I O N
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
Manual SDs-01 E 3.2.2003 18:26 Uhr Seite 12
16
BI-DIR
UNI-DIR AES3
S/P-DIF op
1
SPLIT
This setting allows for unidirectional format conversion (see »MODE«, »UNI-
DIR«) of an AES3 source signal (see »AUDIO
IN «, »AES3«) simultaneously to
all available output formats. The SCMS status of the S/P-DIF output signals
is set to original (see »SCMS -1«, »ORIG«). Thus, the original input signal is
not lost during the conversion process and available for further use!
Within the »AUDIO IN « menu, you can select with the »SELECT« button the
other available digital audio inputs. When selecting one of the S/P-DIF in-
puts, the SCMS status of the input signal will be displayed in the »STATUS«
area with the first (»1«) row of LEDs.
To set the SCMS status of the S/P-DIF outputs as »ORIG« or »1st«, enter the
SCMS« menu by pressing the »MENU« button repeatedly and select with
the »SELECT« button the option prefered. The SCMS settings are made in-
dependently of the SCMS status of the incoming S/P-DIF signal. If you want
to have the SCMS status of the S/P-DIF outputs equal to this one of the S/P-
DIF input signal, select »PASS«.
Further Setting Examples
SCMS
DTS-CD
NONE-PCM
1st
ORIG
MODE
AES3id
S/P-DIF co
2
AUDIO IN
ORIG
PASS
1st
Unidirectional Format Conversions
Unidirectional format conversion from AES3id to AES3, S/P-DIF optical + coaxial,
AES3id. The SCMS status of the S/P-DIF outputs is set as first copy.
1 2 1 2
STATUS
BI-DIR
UNI-DIR AES3
S/P-DIF op
1
SPLIT
SCMS
DTS-CD
NONE-PCM
1st
ORIG
MODE
AES3id
S/P-DIF co
2
AUDIO
IN
ORIG
PASS
1st
1 2 1 2
STATUS
Unidirectional format conversion from S/P-DIF coaxial to AES3, AES3id, S/P-DIF
optical + coaxial. The SCMS status of the S/P-DIF outputs is set as first copy. The
SCMS status of the S/P-DIF input signal is original.
BI-DIR
UNI-DIR AES3
S/P-DIF op
1
SPLIT
SCMS
DTS-CD
NONE-PCM
1st
ORIG
MODE
AES3id
S/P-DIF co
2
AUDIO IN
ORIG
PASS
1st
1 2 1 2
STATUS
Bidirectional Format Conversions
BI-DIR
UNI-DIR AES3
S/P-DIF op
1
SPLIT
SCMS
DTS-CD
NONE-PCM
1st
ORIG
MODE
AES3id
S/P-DIF co
2
AUDIO
IN
ORIG
PASS
1st
1 2 1 2
STATUS
This is a special function of your MC-1.1+! It allows, as shown in the sketch
above, to receive an AES3 and AES3id signal simultaneously. The AES3 input
signal is converted to AES3id and the AES3id input signal is converted to
AES3. The other digital audio outputs are shut down. In this mode, the MC-
1.1+ is able to work simultaneously with two different sampling rates.
Any combination of two inputs for bidirectional conversion is possible to
select by pressing the »SELECT« button repeatedly within the »AUDIO
IN «
menu.