Microtel MicroWin 2000 - Manual (Page 54)

MicroWIN 2000 Manual
Version 1.0
Runtime Forms
The Runtime forms show the user information on connecting to a dialer.
Throughout these forms, remember that there is a notion of the Current Selected Entry. This is
the entry that currently has the focus. As an example, look at the picture below. This shows that
the current selected entry is West Judge Perez Lift Station. See Top of Runtime Forms below
for more details.
Once a dialer has been entered into the system, MicroWIN 2000 can easily connect to
this dialer to get information about what it is doing. It can be used to view, record, and
print a dialer’s status information. It can also be used to perform little tasks like
acknowledging alarms, changing analog and digital output states, and clearing a specified
channel’s counter values.
These forms also give the user the ability to retrieve, view and print Dialer Archives.
Dialer Archives are channel events that have been previously recorded into the memory
of the dialer. Archives can be set up to record a channel’s Status Events and/or to log a
channel’s status at some specified Time Interval. The recorded Status Event archives
will provide detailed information about when specific status events have occurred. Time
Interval Archives are used to record flow readings/tank levels at some specified time
interval.
TIP -
The current entry can be selected from any of these forms by using the
drop-down box on top of the form. The form will update appropriately.
49