iStorage diskG Manual User Manual
Page 14
www.istorage-uk.com
14
5.
In the Computer Manage window, click Disk Management. In the Disk
Management window, the iStorage diskGenie is recognized as an unknown
device that is uninitialized and unallocated.
6.
Do the following to make the drive recognized as a basic drive.
•
If the Initialize and Convert Disk Wizard window opens, click Cancel,
then initialize the disk manually using the following steps.
a. Right-click Unknown Disk, and then select Initialize Disk.
b. In the Initialize Disk window, click OK.
7.
Right-click in the blank area under the Unallocated section, and then select
New Partition. The Welcome to the New Partition Wizard window opens.
8.
Click Next.
9.
Select Primary partition and click Next.
10.
If you need only one partition, accept the default partition size and click Next.
11.
Click Next.
12.
Create a volume label, select Perform a quick format, and then click Next.
13.
Click Finish.
14.
Wait until the format process is complete. The iStorage diskGenie will be
recognized and it is available for use.