Interlogix Topaz Installation Sheet - Manual (Page 11)

Starting your installation
Important notes for Windows 7 and Vista installations
• In a Windows 7 or Vista environment, the installation must be
executed by running setup.exe using the Run as Administrator
option (i.e., right-click setup.exe and under Properties, click the
Run as Administrator check box).
• In a Windows 7 or Vista environment, Topaz 1.5 cannot be
installed on the C drive. Please make sure that you have created
another partition on a different drive than C, before installing Topaz
1.5. The C drive has special rules designed to protect the
operating environment.) Topaz 1.5 requires installation on a non-C
drive partition to operate normally.
To install Topaz 1.5:
The first computer in a system on which Topaz is installed must be the
server. Subsequent computers loaded with Topaz are normally
workstations.
1. Log onto Windows as the Administrator.
2. Insert the Topaz Installation CD into the CD drive.
3. If Auto Insert Notification is enabled for your CD drive, the
Installation Menu will appear and allow you to make a selection.
Otherwise, double-click on the drive of the CD on your system and
double-click startup.hta (located in the root directory of the CD).
Note: If you are using Windows XP Professional operating system
with Service Pack 3, see the Topaz User Manual for special
security settings for the firewall. If you are using the Windows 7 or
Vista operating system, refer to “Important notes for Windows 7
and Vista installations” above.
4. On the Topaz Installation Menu, click Install Topaz. The Topaz
installation program starts.
5. The Welcome to the Topaz Installation Wizard dialog window
appears. Click Next.
6. The End User License Agreement window appears. Read the
license agreement, and then click the radio button beside I accept
the license agreement. Click Next.
Topaz Installation Sheet 11