Interlogix TVM-4200 - Manual (Page 4)

2 User Manual
7. Lightning: For added protection during a
lighting storm or when this unit is left
unattended and unused for long periods
of time, unplug the unit from the wall
outlet and disconnect the cable system.
This will prevent damage to the unit due
to lightning and power line surges.
8. Mains plug (2 pin/3 pin):
• Do not remove the grounding or
earth connection from the power
supply / mains plug.
• Always remember to unplug the
monitor from the power supply
under the following circumstances if
the monitor will not be used for a
long period of time, if the power
supply cable or plug/connector is
damaged or if the monitor housing
is damaged or broken.
CAUTION: Do not attempt to dismantle this
product. Any attempt to dismantle or remove
the covers from this product will invalidate the
warranty and may also result in serious injury.
Introduction
This manual explains how to correctly install,
operate and get the best performance from
your monitor. Please read this user manual
carefully before installing your monitor then
keep it near your monitor for quick reference.
First, please check that the contents of the
box correspond with the following checklist:
• LED monitor
• Power cord
• VGA cable
• AC adaptor
• User manual
If any item is missing or damaged, please
contact your dealer. Please keep the box and
packing materials so that you may properly
store or transport your monitor.
Features
 The convenient and user-friendly on-
screen display allows for easy and
accurate adjustments of screen size,
position, and screen color.
 The monitor complies with the VESA
Display Data Channel (DDC)
specification for Plug and Play
compatibility. Advanced micro circuitry
makes setup and configuration fast and
effortless.
 The monitor features Advanced Color
Controls for fine-tuning to meet your own
personal tastes or application
requirements. Use the on-screen
controls to adjust the color temperature,
 Press the Menu button and activate the
Self-Diagnosis menu to determine
whether your monitor is functioning
normally, not receiving a signal, or is
receiving a signal that is out of scanning
range.
Connections
1. AC input
2. DC 12V 0.4 Out
3. Headphone Out
4. PC stereo input
5. HDMI
HDMI signal input.
6. VGA
RGB signal input. VIDEO IN
Composite signal input.
7. DVI
DVI-D signal input