Interlogix TruVision Camera Mounts - Manual (Page 16)

14 TruVision Dome Brackets Installation Manual
4. Loosen the screws on the dome enclosure using
the supplied hex wrench, and remove the dome
enclosure and liner.
5. Connect the cables to the dome camera.
6. Using the enclosed screws, attach the dome
module of the camera to the bracket.
7. Re-attach the dome liner and enclosure to the
camera.
To mount a bullet camera on a pole:
1. At the desired mounting place, securely fasten the
TVD-M-PMA pole-mount adaptor to the pole. Pull
the cables through the mount.
2. Connect the cables to the camera.
3. Use the enclosed screws to attach the camera to
the pole mount.
4. Adjust the camera position and angle as required.
Specifications
SKU Dimensions Weight
TVD-SNB 253 Ч 95 Ч 180 mm 490 g (1.2 lb)
TVD-PPB Ш 150 Ч 537 mm 1169 g (2.56 lb)
TVD-M2-FM Ш 210 Ч 90 mm 540 g (1.19 lb)
TVD-M-PMA 117 Ч 194 Ч 143 mm 1205 g (2.66 lb)
TVD-M2-WEBM Ш135 Ч 9 mm 25 g (0.05 lb)
TVD-M2-WM Ш135 Ч 182.5 Ч 251 mm 580 g (1.28 lb)
TVD-CB5 Ш 160 Ч 80 mm 490 g (1.2 lb)
TVD-CB5A Ш 160 Ч 100 mm 340 g ( 0.75 lb)
TVD-CB3 Ш 140 Ч 60 mm 320 g (0.71 lb)