Interlogix TruVision Camera Mounts - Manual (Page 11)

TruVision Dome Brackets Installation Manual 9
2. Using screws provided, fasten the mounting plate
(A) to the in-ceiling mounting base (B).
3. Push the dome camera into the in-ceiling
mounting base.
Caution: For safety reasons, use safety cables
to securely attach the camera dome to the in-
ceiling mounting base and to attach the in-ceiling
mounting base to the building’s infrastructure.
Safety
cable
4. Rotate the camera 10 degrees counterclockwise
(A) and then securely fasten the camera to the
in-ceiling mounting base using the lock screws
(B).
5. Push the camera with in-ceiling mounting base
into the ceiling hole.
6. Using the lock screws (A), securely fasten the
camera to the ceiling.
7. To set up the camera image, remove the camera
enclosure and connect the RCA analog video
output to a monitor (D).
Loosen the lens set screw (E) and pan (A), tilt (B)
or rotate (C) the lens to obtain the desired
surveillance angle. Adjust the lens focus. When
all adjustments have been done, refasten the
lens set screw.
8. Using screws, attach the trim ring to the in-ceiling
mounting base on the ceiling.