Interlogix TruVision Camera Mounts - Manual (Page 13)

TruVision Dome Brackets Installation Manual 11
6. Connect the cables to the dome camera.
7. Insert the dome module into the cup base .
8. Re-attach the dome liner and enclosure to the
camera.
3-inch dome cameras
Use the TVD-PPB bracket and the TVD-CB3 cup base. See “Bracket and cup base description” on
page 2 for examples of the assembled bracket.
To mount a pendant-mount bracket on a ceiling:
1. Screw the mounting plate onto the tube and
fasten with the locking screw, as shown.
2. Pull the camera cables through the bracket tube
and then attach the bracket to the ceiling with
expansion screws.
3. Screw the cup base onto the tube and fasten
with the locking screw (A).
Using the enclosed screws, attach the camera
mounting plate (B) to the cup base.
Note: The camera mounting plate is shipped with
the dome camera.
4. Loosen the screws on the dome enclosure (1)
using the supplied hex wrench, and remove the
dome enclosure and liner (2).