Stat us, St at us – Cisco XR 12000 Series User Manual
Page 19
1-7
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 1 Overview: Cisco XR 12000 Series Router SPA Interface Processors
Cisco XR 12000 SIP-600 Overview
shows a Cisco XR 12000 SIP-600
with 2 SPAs installed. The left SPA slot is subslot 0 and
the right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.
Figure 1-3
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
SPA Interface Addresses on the Cisco XR 12000 SIP-600
A Cisco 12000 Series Router identifies a SPA interface address by its SIP slot number, SPA subslot, and
port number on the SPA, in the format slot/subslot/port. Subslots and ports are numbered starting from
0, so each Cisco XR 12000 SIP-600 has two subslots 0 (left) and 1 (right). For example, the interface
address of a 1-port SPA located in the second SIP subslot, where the SIP is inserted into router line card
slot 3 is 3/1/0.
shows the slot, subslot, and port locations for the 1-Port 10-Gigabit Ethernet
SPA and the 10-Port Gigabit Ethernet SPA.
Table 1-6
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
Call Out Number
Description
1
Subslot 0
2
Subslot 1
12000-SIP-600
0
116872
STAT
US
SPA-1XTENGE-X
FP-A
ACT
IVE
/LIN
K
SPA10X1GE-A
ST
AT
US
4
9
3
8
2
7
1
6
0
5
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
1
2