Cisco XR 12000 Series - Manual (Page 107)

2-77
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview
The 24-Port Channelized T1/E1/J1 ATM CEoP SPA LEDs are described in the following table.
24-Port Channelized T1/E1/J1 ATM CEoP SPA Interface Specifications
The physical layer interface for the 24-Port Channelized T1/E1/J1 ATM CEoP SPA is a
customer-installed high-density connector. The high-density connector has thumbscrews which should
be screwed into the SPA when the cable is installed.
24-Port Channelized T1/E1/J1 ATM CEoP SPA Cables and Connectors
The 24-Port Channelized T1/E1/J1 ATM CEoP SPA requires a Cisco cable (part number
CABLE-24T1E1J1), which is shown in the following figure.
Figure 2-58 24-Port Channelized T1/E1/J1 ATM CEoP SPA High-Density Cable
1 A/C (Alarm/Carrier) LEDs 2 STATUS LED
Table 2-49 24-Port Channelized T1/E1/J1 ATM CEoP SPA LEDs
LED Label Color State Meaning
STATUS Off Off SPA power is off.
Amber On SPA power is on and good, and SPA is being configured.
Green On SPA is ready and operational.
A/C Off Off Port is not enabled by software.
Green On Port is enabled by software.
Amber On Port is enabled by software, and there is at least one alarm.
51 1
100 50
26
1
50
25 250106