Kenwood TK 3100 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

1 Plug the AC adaptor

cable into the adaptor

jack located on the rear

of the charger.

2 Plug the AC adaptor into

an AC outlet.

3 Slide the NiCd battery

pack or the transceiver
equipped with a NiCd
battery pack into the
charging slot.

Make sure the metal

contacts on the battery

pack come in contact

with the charging

terminals.

The charger LED lights
and charging begins.

4 After charging the

supplied KNB'14 battery

pack for 8 hours, remove
it or the transceiver from

the charger.

The charger does not
turn OFF automatically
after charging is
completed.

5 Unplug the AC adaptor

from the AC outlet.

Note: It takes approximately 15 hours to fully charge the optional
KNB-15A battery pack.

20

This manual is related to the following products: