Kenwood TK 3100 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

4 Press the PTT switch to select the

10’s digit of the signalling number

• Each time you press the PTT

switch, a beep sounds and the 10's

digit of the signalling number

changes. There are a total of 4
different numbers (0

3).

Action

Vaiua

Beep pattern

Press and hold

PTT

for 2 seconds

Ox

1 second tone

Press

PTT

1 time ! 1 x

1

Press

PTT

2 times | 2 x

■ •

Press

PTT

3 times

3

X • * *

Note:

To select V". press and hold the PTT switch

until a 1 second tone sounds (approximately

2 seconds).

Pressing the PTT switch more than 3 times

will cause an error tone to sound, and no
value will be selected.

5 Wait for 2 seconds to hear the

beep pattern of the 10’s digit
number you selected .

6 Press the PTT switch to select the

1’s digit of the signalling number

* Each time you press the PTT

switch, a beep sounds and the 1's
digit of the signalling number
changes. There are a total of 10
different numbers (0 ~ 9).

13

This manual is related to the following products: