Washer operating instructions, Starting your washer, Position – Whirlpool LT4900XS User Manual
Page 6: Selector switch, Select a load size, Seiect, O. water temperatures, Load sizes and water levels, 1 a t : j 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Washer operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load In the washer before starting it.
PERMANENT
PRESS
TEMPERATURE WATER LEVEL
Position
SELECTOR SWiTCH
2
.
SELECT A LOAD SIZE
Move Selector Switch to WASHER
position. Washer will not operate
when switch is in DRYER position.
^ Seiect
O.
WATER TEMPERATURES
•
• Match the wash water tennperature
to the type of fabrics and soils being
washed.
Recommended wash temperatures
can be found in your "Laundry Guide ”
6 '
• Turn the knob to point at a setting
that describes the size of load you
want to wash
• The water level can be set for EX
SMALL, MEDIUM or LARGE loads.
Select the water level that
matches the load size
See your "Laundry Guide" for details
on load sizes.
LOAD SiZES AND
WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can tear items.
LARGE
11.3 gal. (42.7 L)
MEDIUM
8.5 gol. (32.1 L)
EX SMALL
5.6 got (21.2 L)
*Approximale till with load
1 A T
: J 1 :
/~