Cleaning the lint filter, Dryer operating instructions, Starting your dryer – Whirlpool LT4900XS User Manual
Page 13: H\!i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the lint filter
Clean filter after every load for best
filtering results. NOTE: The load type
will vary the amount of lint build-up.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter Is not removable.
3. Replace the agitator barrel and
snap into place.
Dryer operating instructions
Starting Your Dryer
Before starting your dryer, be sure laundry is sorted and loaded
properly (see your "Laundry Guide”). Be sure the door is tightly closed.
PERMANENT
PRESS .
Whirlpool
___^
/
"H\!I
C3
60 E
GENUL WASH SYSTEy
A
WASHER • DRYER
I
PUSH TO START
SELECTOR
REGULAR/
HEAVY
Position
Seiect CYCLE and TIME
Move Selector Switch to DRYER
position. Dryer will not operate
when switch is in WASHER position.
Turn the Control Knob either way to
point to the time setting you want in
the cycle you want.
continued on next page
13