BoomChair ARC - Manual (Page 6)

DAISY CHAINING CHAIRS TOGETHER
Up to 8 chairs can be connected using the wireless method. This requires only one transmitter and all chairs switched to wireless mode.
Step 1: Connect Boomchair to any device using the wireless methods described on pages 4 or 5.
Step 2: Set transmitter and all Boomchair™ channel switches (E) to matching frequency.
Step 3: Turn all Boomchairs™ on by turning Power/Volume knob (A) clockwise.
WIRElESS CONNECTION
Should interference occur, switch the channel on the wireless
transmitter using the top slider bar (Fig. 1).
Switch the channel selector on the Boomchair™ (Fig. 2) to the
same channel as the transmitter. The number corresponds
to the number of dots on the transmitter. Select “0” for non-
wireless connections.
Make sure all cables are securely connected.
Make sure batteries are correctly installed in the transmitter,
and that the power is on, as indicated by the red LED (Fig. 3).
If you experience static or poor reception from your wireless
connection, you may need to select the direct connection
method to ensure the best possible sound quality. See page 5.
VOLUME BASS/TREBLE VIBRATION
0 3 2 1
INPUT OUTPUT
WIRELESS CONNECTION TIPS
Fig. 2
Fig. 1
Fig. 3
Power Switch
WARNING:
DO NOT use the adapter for the chair with this transmitter. It will
permanently damage the transmitter and void your warranty. Use only
9V - 12V DC, 100 mA - 500 mA adapter, or visit www.BoomChair.com
to order the proper adapter.
DIRECT CONNECTION - BE SURE THE WIRElESS CHANNEl SElECTOR IS SWITCHED TO “0”
Step 1: Connect single end of first “Y” adapter to RED RCA plug coming from media device. (Fig.1)
Step 2: Connect single end of second “Y” adapter to WHITE RCA plug coming from media device. (Fig.2)
Step 3: First Cord (Fig.3): Connect RED plug to RED “Y” adapter and WHITE plug to WHITE “Y” adapter. Separate cords as
necessary. Connect mini audio end of cord (3a) to INPUT of first BoomChair™.
Step 4: Second Cord (Fig.4): Connect RED plug to RED “Y” adapter and WHITE plug to WHITE “Y” adapter. Separate cords as
necessary. Connect mini audio end of cord (3a) to INPUT of second BoomChair™.
Method 2: You will need two RCA “Y” adapters (sold separately) and two RCA cords (3a) to connect two BoomChairs™
Media Device or TV
IN
RCA “Y” ADAPTER
(sold separately)
RCA CORD (a)
3a
FIRST CHAIR
Fig. 1
Fig. 2
Fig. 3
3a
Fig. 4
Audio OUT
IN
SECOND CHAIR
BE SURE THE WIRElESS CHANNEl SElECTOR NUMBER ON THE CHAIR MATCHES THE
TRANSMITTER WITH CORRESpONDING NUMBER OF DOTS
Step 1: Connect BoomChair™ to any media device as described on pages 4 or 5. This is the first chair.
Step 2: Connect mini audio cord from audio OUTPUT (G) of first BoomChair™ into audio INPUT (D) of second BoomChair™.
Step 3: Turn all Boomchairs™ on by turning Power/Volume knob (A) clockwise.
Method 1: You will need a Dual Mini Audio cord (at least 6 ft., sold separately) to connect two BoomChairs™