BoomChair ARC - Manual (Page 4)

VOLUME BASS/TREBLE VIBRATION
0 3 2 1
INPUT OUTPUT
CONNECTING TO GAME CONSOLES
Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1)
Step 2: Plug red/white RCA cord from game console into one end of Audio Coupler (3c). (Fig. 2)
Step 3: Plug red/white end of RCA cord (3a) into other end of Audio Coupler (3c).
Step 4: Plug mini audio end of RCA cord (3a) into audio INPUT (D) of BoomChair™. (Fig. 3)
IN
Note: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out.
3c 3a
GAME CONSOLE TV BOOMCHAIR™
Fig. 1 Fig. 3
Cable supplied with game console
Fig. 2
AUDIO COUPLER (c)
ASSEMBLY INSTRUCTIONS
3c 3a
Step 1: Plug Audio Coupler (3c) to red/white RCA cord from game console.
Step 2: Plug red/white end of RCA cord (3a) into other end of Audio Coupler
(3c). (Fig. 4)
Step 3: Plug mini audio end of RCA cord (3a) into Wireless Transmitter (9).
(Fig. 5)
Step 3: Set transmitter and channel switch (E) to matching frequency.
Fig. 4
Fig. 5
Attach right arm rail to seat bottom using hex bolts (12) and
hex wrench (13). Repeat for left side.
Attach seat back to seat bottom using two large bolts (11).
Connect audio cords from backrest and headrest.
Connect plugs from backrest and seat bottom.
Connect power receptacle cord (4) to power supply cord (2).
Plug power supply (2) into wall outlet.
Turn Boomchair™ on by turning Power knob (C) clockwise.
Insert 4 AA batteries (not included) into wireless transmitter.
Turn power switch on.
9
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
STEP 5
4
2
STEP
DIRECT CONNECTION - BE SURE THE WIRElESS CHANNEl SElECTOR IS SWITCHED TO “0”
3c 3a
WIRElESS CONNECTION BE SURE THE WIRElESS CHANNEl SElECTOR NUMBER ON THE CHAIR MATCHES THE
TRANSMITTER WITH CORRESpONDING NUMBER OF DOTS
STEP
STEP
STEP