Avlink CX-2088 - Manual (Page 21)

CX Matrix Switching System—User Manual
20
Example 2: Synchronously switch the NO. 4 video signal to the NO. 1, 3, 5, 6 output channels.
Key LCD Display Operation
1. First press the “AUDIO”
key to turn off the Audio LED
light, then enter the output
channel.
2. Press the NO. 1 key of the
output channel for 2 seconds
and then enter the input
channel when the red 0 LCD
display begins to flicker.
3. Press the NO. 4 key of the
input channel for 2 seconds to
select operation of the
previously set switching from
NO. 4 channel to NO. 1
channel. Enter the output
channel when VIDEO shows
input channel as 4 on NO. 1
channel of the LCD.
4. Press the NO. 3 key of the
output channel for 2 seconds,
and enter the input channel
when the red 0 of the LCD
begins to flicker.
5. Press the NO. 4 key of the
input channel for 2 seconds to
select operation of the
previously set NO. 4 input
channel and NO. 1 and 3
output channels. When video
shows 4 on LCD NO.1 and
NO.3 channels, enter the
output channels.
6. Press the NO. 5 key in the
output channel for 2 seconds
and enter the input channel
when the red 0 indicator on the
LCD begins to flicker.