beautypg.com

AquaCraft SuperVee 27 User Manual

Page 3

background image

As with any hobby, it is a good idea to assemble a useful
collection of tools and accessories to bring along anytime
you head out to the pond. Here are some items you will want
to keep handy.

Metric and Standard Hex Drivers

Metric wrenches (10mm and 12mm) Pliers

Hook & Loop Material (GPMQ4480)

Hobby Knife (HCAR0109)

Marine-grade grease for lubricating the drive cable

(AQUB9500) GrimRacer Speed Grease Driveline

Cable Lube

Extra ‘AA’ batteries

Thread locking compound

CA glue and De-bonder

Paper towels

Spray-on glass cleaner

Sunglasses

Sun block

Waders or rubber boots

Cooler with plenty of cold water and soda

Folding table

Lawn chairs

First-aid kit

Canopy for shelter

BOW: The front of the boat

STERN: The back of the boat

PORT: This is the left side of the boat when aboard and facing
the front (bow). An easy way to remember this is that both
port and left contain four letters.

STARBOARD: This is the right side of the boat when aboard
and facing the front (bow).

HULL: The body of the boat.

DECK: The top of the boat.

HATCH: Typically a removable top to access the inside of
the hull.

Carefully remove your SuperVee 27 Brushless boat and stand
from the box. You may wish to keep the box in order to
transport and store your SuperVee Brushless 27.

Decals have been provided for your SuperVee 27 Brushless.
Simply cut them out, peel, and stick! See the photos on the
box for a decal placement example.

THE BOAT STAND

Your boat comes with a custom laser cut and engraved stand.
It’s pre-built with soft protective cradle strips to help keep
your boat scuff free and get you on the water fast.

TRANSMITTER ASSEMBLY
Note
: The transmitter is not water resistant and should never
come in contact with water.

1. Remove the transmitter antenna from the plastic bag located

on the back of the cardboard transmitter protector. Screw the
antenna into the hole located at the top of the transmitter. Give a
light tug on the antenna to make sure it is threaded in properly.

PREPARING YOUR BOAT FOR OPERATION

BOAT TERMINOLOGY

OTHER USEFUL ITEMS TO HAVE ON HAND

USEFUL TOOLBOX ITEMS

3