AquaCraft SuperVee 27 - Manual (Page 11)

11
AQUACRAFT MODELS ™ TOP SPEED ™ 2
NITRO ARR
Based on a record-holding, race-winning design, the Top
Speed 2 has everything an aspiring competition modeler
could want: a high-quality, painted (in red, yellow, orange or
white) and finished fiberglass hull; performance features to
boost speed and improve handling; and a complete hardware
package for installing any radio and engine you choose.
Strakes and water breaks allow the Top Speed 2 to reach
tremendous speeds. A slot on the underside of the cowl lets
you add weight to fine-tune balance. While veteran racers
will no doubt be impressed with the Top Speed 2’s
performance, its ease of assembly and operating simplicity
make it ideal for new boaters, too.
AQUB0001 white,
AQUB0002 yellow, AQUB0003 red, AQUB0004 orange
AQUACRAFT MODELS V24
ONE-DESIGN GASOLINE RTR
Beginners will like the ease and simplicity, veterans will
applaud the construction — and both will love the way this
4-1/2’ assault force slices through the surf! The driving force
is a Fuji-Imvac
™ BT-24 marine engine, good for up to 40
minutes of high-gear haulin’ per fill-up. A tuned pipe keeps
the action hot...the Tri-Flow water cooling system keeps the
BT-24 running smooth and sweet. Power delivery is courtesy
of a ¼” flex drive and an ASD (Adjustable Surface Drive) that
allows you to fine-tune the angle of the 65mm stainless steel
prop. The fiberglass hull is double-stepped to reduce drag,
and features strakes, a vertical fin and wings to enhance
stability and handling. Fiberglass, aluminum and stainless
steel construction contribute to durability — and control is
courtesy of a Futaba 2PEKA FM radio, metal-geared S3305
servo and the Super Wedge
™ rudder. AQUB40**
Built under license from ocke mannerfelt design
AQUACRAFT MODELS REEF RACER ™ 2 RTR
Dive into offshore action with the Reef Racer 2! It comes out of
the box with decals already in place and the radio gear, motor
and ESC installed. Twin, twist-off hatches on the enclosed hull
and a hook & loop-attached hatch keep ‘em protected against
taking water, but release easily for pack changes and
maintenance. Drop in a pack, bury the throttle and the Reef Racer
leaps into action! You’ll enjoy the quick response of the direct
drive and the Reef Racer 2’s “turn on a dime” maneuverability —
even at top speed. If you happen to flip or roll — don’t worry! The
self-righting hull gets you hatch-side up and back into the action
in seconds. And if you’re a southpaw, you’ll be glad to know you
can adapt the included AquaCraft pistol for left-hand use with just
a Phillips screwdriver and a few minutes. Available in six sizzling
colors — and all of ‘em ready to make waves on the water!
AQUB14**
AQUACRAFT MODELS KING’S RANSOM ™
PIRATE SHIP RTR
Don’t look any further for a ready-to-run R/C pirate ship,
because AquaCraft has the one and only: the King’s Ransom,
a masterpiece that brings pirate lore to life with its included
motor, ESC, and 2-channel radio system — all installed. The
painted fiberglass hull is decked out with some of the richest
detail you’ve ever seen in an RTR vessel: wood planking,
railings and banisters, retractable walk-plank...even four
pirate figures, hand-painted for realism with a capital “Aaar!”
Using provided polycarbonate inserts, the cloth sails can be
bowed to appear wind-filled on static display. To head out for
high seas, just remove the strips, roll up the sails, and screw
the stabilizing 3-pound keel to the hull. Two handy stands are
included, too — one that accommodates the model plus keel,
and another with name plate for display.
AQUB58**