AquaCraft Minimono - Manual (Page 4)

4
UNDERSTANDING YOUR TRANSMITTER
1. Steering Wheel 2. LED Power Indicator
3. Power ON/OFF Button 4. Throttle Trigger
5. Steering Rate Adjustment (Increases or decreases the turning
radius of the boat.)
6. Throttle Reversing Switch (Position at “R” for your Minimono.)
7. Throttle Trim Dial (Position at 2 o’clock for your Minimono.)
8. Steering Trim (Adjusts the tracking of the boat.)
9. Steering Reversing Switch (Position at “N” for your Minimono.)
INITIAL SET UP
Install four “AA” batteries into the transmitter. Turn the
transmitter on, making sure the LED is glowing bright red. If the
light is flashing the batteries are low and need to be replaced.
Remove the canopy and install the provided
hook and loop to your battery packs.
Install the battery in the floor of the boat.