AquaCraft Mini Wildcat - Manual (Page 6)

6
1. Rotate the cowl lock at the front.
2. Remove the cowl and deck covers.
3. Unplug the battery pack and
remove it from the boat.
4. Plug the charger into an automobile’s 12 volt power outlet. Once the
charger is plugged in it will start to beep and the light will begin to
fl ash. Place the charger outside your automobile.
5. Join the battery and charger
connectors. The connectors are
designed to only connect one way
to prevent the battery from being
hooked up backwards.
ACCESSING AND CHARGING THE BATTERY PACK
IMPORTANT PRECAUTIONS
• Do not charge the battery with the vehicle’s engine running.
• Always place the battery and charger outside the vehicle
when charging.
• Charge only the Mini Wildcat’s 6-cell 7.2 volt 1100mAh
NiMH rechargeable battery. Do not attempt to charge other
battery types, as damage may occur to the battery
and charger.
• Do not allow water or foreign objects into the charger.
• Do not cover the air intake vents on the charger as this can
cause the charger to over heat and become damaged.
• Do not leave the charger unattended while charging.
Disconnect the battery immediately if the charger and/or
battery become hot.
• Do not charge hot batteries.
• Keep out of the reach of children.