AquaCraft Mini Wildcat - Manual (Page 5)

5
1. Slide the battery door off the
bottom of the transmitter.
2. Install 8“AA” batteries into the transmitter in the confi guration molded
into the battery fl oor.
3. Reinstall the battery door onto the
bottom of the transmitter.
4. Turn the transmitter “ON” using the switch on the transmitter’s left
side. The battery level indicator light (LED) should glow red. If the light
is fl ashing, the batteries are low and need to be replaced.
• The antenna tube has the receiver
wire pre-installed. Slip the antenna
tube into the antenna mount.
INSTALLING THE TRANSMITTER BATTERIES
INSTALLING THE ANTENNA