AquaCraft Air Force - Manual (Page 13)

To order replacement parts for the AquaCraft Air Force, use the
order numbers in the Replacement Parts List that follows.
Replacement parts are available only as listed and can be
purchased from hobby shops or mail order/ Internet order firms.
Hardware items (screws, nuts, bolts) are also available from these
outlets. If you need assistance locating a dealer to purchase parts,
visit www.hobbico.com and click on “Where to Buy.” If this kit
is missing parts, contact Hobbico Product Support.
Replacement Parts List
Order # Description
HCAB6500 Engine mounts w/ screws (left & right engine pod “legs”)
HCAB8700 Rudder assembly w/ screws (rudder, rudder mount,
rudder arm)
HCAB7900 Spinner assembly (spinner assembly complete)
HCAB6450 White engine cowl/ fiberglass (white cowl w/4 screws)
HCAB6451 Yellow engine cowl/ fiberglass (yellow cowl w/4 screws)
HCAB6452 Blue engine cowl/ fiberglass (blue cowl w/4 screws)
HCAB6453 Green engine cowl/ fiberglass (green cowl w/4 screws)
HCAB6454 Orange engine cowl/ fiberglass (orange cowl w/4 screws)
HCAB6455 Red engine cowl/ fiberglass (red cowl w/ four screws)
HCAB6456 Gray engine cowl/ fiberglass (gray cowl w/ four screws)
HCAB6300 Decal sheet (three main sheets plus cockpit decals)
HCAB6550 Engine platform w/hardware (pre-assembled engine
mount)
HCAB9010 Throttle and rudder cable w/hardware (cables cut to
length)
HCAB6900 Fuel tank (complete fuel tank)
HCAB6210 Assembled white canopy/ hatch (comes w/hardware)
HCAB6211 Assembled yellow canopy/ hatch (comes w/hardware)
HCAB6212 Assembled blue canopy/ hatch (comes w/hardware)
HCAB6213 Assembled green canopy/ hatch (comes w/hardware)
HCAB6214 Assembled orange canopy/ hatch (comes w/hardware)
HCAB6215 Assembled red canopy/ hatch (comes with hardware)
HCAB6216 Assembled gray canopy/ hatch (comes with hardware)
HCAB6200 Canopy/ hatch unpainted (unassembled canopy w/
hardware)
Hobbico Safety Stick ™ Starter
Start your engine the safe, easy, economical way – with
Hobbico’s “chicken stick”-style Safety Stick. Its comfortably
contoured, hardwood handle gives you the perfect grip for
flip starting your engine on the flight line. The end is rubber-
coated to prevent breaking or damaging your propellers.
There’s no better way to turn a couple of dollars into years of
dependable engine starts! HCAP3335
Hobbico Super Hot-Shot ™ 2 Glo-Starter
The Super Hot-Shot 2 combines a locking glow plug clip for
standard or 4-stroke plugs with a high-capacity Sanyo
®
rechargeable NiCd. It delivers 4000mA – enough for an entire
day of modeling. Features include a Twist-and-Lock
Connector and heavy-duty wall outlet adapter with LED
indicator for recharging. HCAP2520
Hobbico Hand-Crank Fuel Pump
Uniquely geared for efficient
operation – and ergonomically
shaped for comfort – the Hand
Crank Fuel Pump delivers over
1/4 ounce of glow fuel with every
turn of the handle. It fills or drains
with equal ease. The pump
comes with fuel tubing and two
screws for easy field box
attachment. HCAP3015
Hobbico TorqMaster ™ 90
Deluxe 12V Starter
The TorqMaster 90 Deluxe
12V starts engines up to .90
cu. in. and includes an
aluminum starter cone with
grooved silicone insert;
soldered copper contacts;
thick carbon brushes; easy
press switch; 5' DC input
cord; and factory-soldered
battery clips. Spinners and
hubs over 3" in diameter require both Jumbo Starter Cone and
Jumbo Rubber Insert, available separately. HCAP3200
Hobbico After Run Engine Oil
After each time you run your engine,
just take a few seconds to put After-Run
Engine Oil into its carburetor – that’s a
quick, easy way to prevent varnish or
gum build-up, and to protect bearings
and internal parts from rust and
corrosion. After-Run Engine Oil works
wonders to keep 2- and 4-stroke engines
performing in peak condition. Available
in a handy, 2-ounce bottle. HCAP3000
OTHER ITEMS AVAILABLE FROM HOBBICO
ORDERING REPLACEMENT PARTS
13