Acura 2007 TL - Owner's Manual - Manual (Page 64)

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. This indicator has three functions:
It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
It flashes when VSA is active (see
page
).
It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. See page
for more
information on the VSA system.
This indicator comes on when you
set the cruise control. See page
for information on operating the
cruise control.
If it comes on and stays on at any
other time, or if it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page
for more information on the
VSA system.
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button (see
page ).
1.
2.
3.
264
264
264
184
184
Vehicle Stability Assist
(VSA) System Indicator VSA Activation Indicator Cruise Main Indicator
Cruise Control Indicator
Instrument Panel Indicators
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
61
Main Menu Table of Contents