beautypg.com

Connecting or disconnecting an svc, Decommissioning or recommissioning an svc, Svc configuration window—detailed description – Cisco 12000/10700 V3.1.1 User Manual

Page 362: Configuration

background image

12-38

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 12 Managing ATM Connections

SVC Configuration

Step 2

Choose the Chassis, Module, Interface, and Connections (SVC) from the list boxes at the left of the
window.

Enter the relevant values in the tab, using the drop-down lists and data entry boxes. For a detailed
description of the fields within this tab, see

“SVC Configuration Window—Detailed Description”

section on page 12-38

.

Step 3

Click the Save icon to save the changes made.

Connecting or Disconnecting an SVC

Connecting an SVC creates the SVC on the device and makes it a real, working connection. The SVC is
also commissioned at this time, which allows you to manage configuration and status details.

Disconnecting an SVC disconnects the connection entirely from the device.

To connect or disconnect an SVC:

Make sure that the SVC you want to connect or disconnect is selected in the list boxes at the left of
the window.

Click the Connect or Disconnect button in the Action area.

Decommissioning or Recommissioning an SVC

When you connect an SVC, it is automatically commissioned as well. Decommissioning does not
disconnect the SVC.

To decommission a connected SVC:

Make sure that the SVC you want to decommission is selected in the list boxes at the left of the
window.

Click Decommission in the Action area. The SVC is placed into the Decommissioned state.

Once you have decommissioned a connected SVC, you might want to recommission it, which
re-establishes management on the connection. To recommission a decommissioned SVC, simply click
Connect.

SVC Configuration Window—Detailed Description

The ATM SVC Configuration window (see

Figure 12-30

) contains one tab: Configuration.

Configuration

The Configuration tab contains four areas:

SVC Parameters.

VC Parameters.

OAM Parameters.

Actions.