beautypg.com

Applying an atm qos profile to an atm connection, Applying an atm qos profile to an – Cisco 12000/10700 V3.1.1 User Manual

Page 352

background image

12-28

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 12 Managing ATM Connections

Applying an ATM QoS Profile to an ATM Connection

Figure 12-23 Deployment Summary

Step 14

Click Finish if the Deployment Summary information is correct. Click Cancel to stop

the deployment.

The Deployment Wizard closes and the object is created under the selected interface.

Applying an ATM QoS Profile to an ATM Connection

Now you can apply the ATM QoS Profile you created earlier to a PVC or an SVC. To view the ATM QoS
Profiles Management window, proceed as follows:

Step 1

Right-click on the interface that contains the created ATM connection, then choose Cisco 12000/10720
Manager>Configuration>Interface>QoS>ATM QoS Profile Management
. The ATM QoS Profiles
Management window appears.

Note

Profiles can be applied to PVC/SVC that are in the decommissioned state.