beautypg.com

Editing an existing atm interface profile, Deleting an existing atm interface profile – Cisco 12000/10700 V3.1.1 User Manual

Page 186

background image

7-6

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 7 Interface Profiles

Creating an ATM Interface Profile

Editing an Existing ATM Interface Profile

To edit an existing ATM Interface profile, proceed as follows:

Step 1

Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from
an ATM interface object. See

Table 7-2 on page 7-2

for information on which objects allow you to launch

the ATM Interface Configuration Profile window.

Step 2

Choose the profile you wish to edit from the list of existing profiles displayed in the ATM Interface list
at the left of the window (see

Figure 7-2

).

Step 3

Edit the parameters displayed in the Configuration (1) tab, as required.

Step 4

Choose File > Save to save the changes made to the service profile.

Step 5

Choose File > Close to close the window.

Deleting an Existing ATM Interface Profile

To delete an existing ATM Interface profile, proceed as follows:

Step 1

Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from
an ATM interface object. See

Table 7-2 on page 7-2

for information on which objects allow you to launch

the ATM Interface Configuration Profile window.

Step 2

Choose the Edit > Delete Profile. Choose the profile you wish to delete from the list displayed. A
Deletion Prompt window appears (see

Figure 7-4

) for you to confirm that you wish to delete the selected

profile.

Figure 7-4

Deletion Prompt Window

Step 3

Click Yes to delete the selected profile or click No to close the window without deleting the profile.

When a profile is deleted it disappears from the list of existing profiles displayed in the ATM Profile list
at the left of the window.