Audio Damage BigSeq2 - Manual (Page 20)

Output Controls
In the lower right of BigSeq2’s window are two simple but useful controls. The OUTPUT knob controls
BigSeq2’s overall output level. Use it to make BigSeq2 louder or softer as needed. The OUTPUT knob has a
range of -40dB to +6dB, so it can boost quiet signals or tame overly loud noises.
The ACTIVE button effectively turns BigSeq2 on and off. When the ACTIVE button is dimmed, BigSeq2 has no
effect on the incoming signal and passes it through without alteration. Click on the active button to turn it on
and off.