Press [function/chl, Selecting the line mode, Settings – Panasonic KX-TG2670N User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B".
Otherwise the Call Waiting Caller ID Feature may not be used (p. 52). and
the unit may not alert your pager (p. 58). Your phone comes from the
factory set to “A”.
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
1
2
3
4
5
6
7
Press [FUNCTION/CHl.
Press ® or ® repeatedly until the arrow
points to “Program”.
Press 0 (Yes key).
Press ® or [0 repeatedly until the arrow
points to “Set line mode”.
Press 0 (Yes key).
Press 0 or 0 to select “
b
”
or “
a
”.
Press 0 (Save key).
•A beep sounds.
_____
•To return to the standby mode, press [OFF|.
►Save directory
Ringer volume
T A
►=Yes
►Program
Calling pager
T A
►=Yes
►Save DIRECT#
Set flash time
T A
►=Y
gs
►Set line mode
Talk switching
T A
►=Yes
Line mode
:A
T A
►=Save
Line mode
T A
►=Save
•You can exit the programming mode any time by pressing [OFF).
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base. Place on cradle and try again." iS
displayed.
14