Selecting the dialing mode – Panasonic KX-TG2670N User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Dialing Mode
You can program the dialing mode
using the handset near the base
unit.
If you have touch tone service, set to “Tone”. If rotary or pulse service is
used, set to “Pulse”. Your phone comes from the factory set to “Tone".
Make sure the unit is in the standby mode initially.
1
2
Press
IFUNCTION/CHI.
Press ® or B repeatedly until the arrow
points to “Program”.
2
Press ® (Yes key).
4
Press ® or B repeatedly until the arrow
points to “Set dial mode”.
r
Press B (Yes key).
Press B or B to select “Pulse” or
“Tone”.
7
Press B (Save key).
•A beep sounds.
•To return to the standby mode, press
lOFFl.
► Save directory
Ringer volume
▼ A
► =Yes
►Program
Calling pager
J i
►=Yes
►Save DIRECT#
Set flash time
T i
►=Yes
►Set dial mode
TAD program
T A
► =Yes
Dial mode
: Tone
T A
►=Save
Dial mode
:Pulse
T A
►=Save
►You can exit the programming mode any time by pressing (OFF).
►If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base. Place on cradle and try again
.” is displayed.
/3