KMC Controls REE-5017 - Manual (Page 2)

REE-5017 2 Installation Guide © 2014 KMC Controls, Inc. 837-019-03G
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
[email protected]
Important Notices
The material in this document is for information pur-
poses only. The contents and the product it describes
are subject to change without notice. KMC Controls,
Inc. makes no representations or warranties with
respect to this document. In no event shall KMC Con-
trols, Inc. be liable for any damages, direct or incidental,
arising out of or related to the use of this document.
Maintenance
No routine maintenance is required, however
protection from extremes of humidity and dirt is
recommended. Careful installation will help ensure
long-term reliability and performance.
Troubleshooting
• If the fan does not start at the desired time, check
its setpoint.
• Check the wiring.
• Check the voltage from the thermostat/controller
(measured from Terminal T to Terminal –/Neu-
tral). (See the voltage chart on the previous page.)
• See also the MEP-3001, relevant valve, and
relevant thermostat documentation.
More Information
For specifications, see
the REE-5017 Data Sheet
on the KMC web site.