Image dust off ref photo – Nikon D7000 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Image Dust Off Ref Photo

button ^

Setup menu

Acquire reference data for the Image Dust Off option in Capture NX 2 (available

separately; for more information, see the Capture NX 2 manual).

Image Dust Off ref photo

is available only when a CPU lens Is mounted on the

camera. A lens with a focal length of at least 50 mm is recommended. When using a
zoom lens, zoom all the way in.

Choose a start option.

Highlight one of the following options and press

@. To exit without acquiring image dust off data,

press I

Start:

The message shown at right will be

displayed and "rEF" will appear In the
viewfinder and control panel displays.

Clean sensor and then start:

Select this option to

clean the image sensor before starting. The

message shown at right will be displayed and

"rEF" will appear in the viewfinder and control

panel displays when cleaning is complete.

Image Sensor Cleaning

Dust off reference data recorded before image sensor cleaning is performed can not
be used with photographs taken after image sensor cleaning is performed. Select

Clean sensor and then start

only if the dust off reference data will not be used with

existing photographs.

Frame a featureless white object in the viewfinder.

With the lens about ten centimeters (four inches) from a well-lit, featureless
white object, frame the object so that it fills the viewfinder and then press the

shutter-release button halfway.

In autofocus mode, focus will automatically be set to infinity; in manual focus
mode, set focus to infinity manually.

240