Craftsman 917.271641 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

ACCELEFWIONTEST-

4. Move throttle control lever from slow to

fast position. If engine hesitates or
dies, turn idle mixture valve

out

(counterclockwise) 1/8 turn. Repeat

test and continue to adjust, if neces
sary, until engine accelerates
smoothly.

High speed stop is factory adjusted. Do
not adjust - damage may result.

IMPORTANT:

Never tamper with the

engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous. If you think the
engine-governed high speed needs

adjusting, contact a Sears or other

qualified service center, which has proper
equipment and experience to make any

necessary adjustments.

Idle Speed