Craftsman 917.271641 - Manual (Page 18)

MAINTENANCE
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
✓ ✓
Check Tire Pressure
✓
Check Operator Presence and
Jhterlock Systems
✓
Check for Loose Fasteners
Ir 4
✓ 7
✓
Sharpen/Replace Mower Blades
Lubrication Chari ✓
✓
Check BaHery Level
Cleart Battery and Terminals
✓ ✓
Check Transaxle Cooling
✓
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belijs) Tension ✓ s
Check Engine Oil Level ✓
Change Engine Oil
1^2,3
✓
Clean Air Filter
Clean Air Screen
Inspect Mulfler/Spark Arrester
✓
Replace Oil Filter (11 equipped) 1^.2
Clean Engine Cooling Fins ✓ 2
Replace spark Plug ✓ ✓
Replace Air Filter Paper Cartridge ✓ 2
Replace Fuel Filter ✓
1 - Chang* mor* ottoo wtMo op«fa1lng Ljr>cl*ra heavy load or In high 4mU*ntt*mp*faiur««. 5'
2 - 5*fVK* mor« oftofl wh*n oparadng in dirty or dufty oortditlon*, s >
9 • li K|ujpp* Chang* oH *vafy 50 twora. 7
4' flapiaca blades more often when rrwwing in aarxiy aoH
|1 »quipped wilh adjustabl*
Not required H «quipped with maintenanca-lr** batlsry.
TlghtMi front axle pivot boM to 3S 1L4b«. maxirrxjm.
Oo rwt ovatlighlen.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper opera­
tion.
5. Check for loose fasteners.
LUBRICATION CHART
(DSAE 30 or 10w30 MOTOR OIL
(2' REFERTO Maintenance “ENGINE" SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
18