Craftsman 917.270961 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING CHART
PROBLEM
CAUSE
CORRECTION
Loss of power
(Continued)
• Build-up of grass, leaves
and trash under mower.
• Dirty air filter.
• Low oil level/dirty oil.
• Faulty spark plug.
• Dirty fuel filter.
• Stale or dirty fuel.
• Water in fuel.
• Spark plug wire loose.
• Dirty engine air screen/fins.
• Dirty/clogged muffler.
• Loose or damaged wiring.
• Carburetor out of
adjustment.
• Engine valves out of
adjustment.
• Clean underside of mower
housing.
• Clean/replace air filter.
• Check oil levei/change oil.
• Clean and regap or change
spark plug.
• Replace fuel filter.
• Drain fuel tank and refill with
fresh gasoline.
• Drain fuel tank and carbure
tor, refill tank with fresh
gasoline and replace fuel
filter.
• Connect and tighten spark
plug wire.
• Clean engine air screen/
fins.
• Cleari/replace muffler.
• Check all wiring.
• See “To Adjust Carburetor”
in Service Adjustments
section.
• Contact an authorized
service center/department.
Excessive
vibration
• Worn, bent or loose blade.
• Bent blade mandrel.
• Loose/damaged part(s).
' Replace blade.
Tighten blade bolt.
’ Replace blade mandrel.
’ Tighten loose part(s).
Replace damaged parts.
Engine continues
to run when
operator ieaves
seat with
attachment
ciutch engaged
Faulty operator-safety
presence control system.
• Check wiring, switches and
connections. If not corrected,
contact an authorized
service center/department.
Poor cut - uneven
• Worn, bent or loose blade.
• Mower deck not level.
• Buildup of grass, leaves,
and trash under mower.
• Bent blade mandrel.
• Clogged mower deck vent
from build-up of grass,
leaves, and trash around
mandrels.
• Replace blade. Tighten
biade bolt.
• Level mower deck.
• Clean underside of mower
housing.
• Replace blade mandrel.
• Clean around mandrels to
open vent holes.
Mower blades will
not rotate
• Obstruction in clutch
mechanism.
• Worn/damaged mower
drive belt.
• Frozen idler puiley.
• Frozen blade mandrel.
Remove obstruction.
Replace mower drive belt.
Replace idler puliey.
Replace blade mandrel.
31