Craftsman 917.270961 - Manual (Page 18)

MAINTENANCE
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
✓ ✓
x> otn viot : UA TES
Check Tire Pressure
✓ ✓
Check Operator Presence and
Interiock Systems
✓
Check for Loose Fasteners
✓ ✓ 7 ✓
Sharpen/Replace Mower Blades
✓ *
Lubrication Chart
✓ ✓
Check Battery Level
Clean Battery and Terminals
✓ ✓
Check T ransaxie Coding
✓
Acfust Blade Belt(s) Tension
✓ 5
Adjust Motion Drive Bell(s) Tension
✓ s
Check Engine Oil Level
✓ ✓
Change Engine Oil
1^2.3 ✓
Clean Air Riter
✓ 2
Clean Air Screen
f / z
Inspect Muffler/Spark Arrester
✓
Replace Oil Filter (If equipped)
•^.2
Clean Engine Cooling Fins
✓ 2
Replace Spark Plug
✓ ✓
Replace Air Filter Paper Cartridge
✓ 2
Replace Fuel Filter
✓
S - Sarvic« more often when operating in dirty or dusty conditions.
3 - H equipped with oil filtsr, change oil every 50 hours.
A ~ Replace blades more otien when mowing In sandy soli,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to property maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
6 - Not requlrad if equipped with rnetotenance-fre« battery.
7 ■ Tighten front axle pivot bolt to 35 maximum.
Do not overtighten.
LUBRICATION CHART
(D Spindle
Zerk
©Front Wheel
Bearing
Zerk
® Spindle
Zerk
©Front Wheel
Bearing Zerk
©Engine'^
18
©General Purpose Grease
©Refer to Maintenance “Engine” Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.