Recording on a video tape, Using the sleep timer [t, Receiver operations – Sony STR-DE345 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Receiver Operations

Recording on a video tape

You can record from a TV or a satellite receiver using

the receiver. You can also add audio from a variety of

audio sources when editing a video tape. See your

VCR's instruction manual if you need help.

Press TV/SAT to select the program source.

Set the component to be ready for playing.
For example, turn on the TV and TV tuner.

Insert a blank video tape into the VCR for

recording.

Start recording on the VCR.

You can replace audio while editing a video tape

At the point you want to start adding different sound,

press another function button (for example, CD) and

start playback. The sound from the selected component

will be recorded over the original audio.

Using the Sleep Timer [T

You can set the receiver to turn off automatically at a

time you specify.

Press SLEEP on the remote while the power is on.

Each time you press SLEEP, the time changes as shown

below.

• 2:00:00 —► 1:30:00 —► 1:00:00 —► 0:30:00 —» OFF-

The display dims after you specify the time.

You can check the time remaining before the

receiver turns off

Press SLEEP on the remote. The remaining time appears

in the display.

To resume recording the original sound, press the

TV/SAT function button.

Note

You cannot record the audio and video signal during

5.1 CH/DVD mode.