Sony KV-32XBR100 User Manual
Trinitixyn^color tv, Sony
Table of contents
Document Outline
- Trinitixyn^Color TV
- WARNING
- Table of contents
- Precautions
- Step 1: Installing the TV
- step 2:
- Connections
- step 3: Setting up the remote commander
- Press the MENU button to display the main menu.
- 2 Press the joystick up or down to move the cursor (W ) to the desired item.
- 3 Click the joystick to display the selected menu.
- Step 4: Setting up the TV automatically
- (AUTO SET UP)
- Press the joystick up or down to select the item, then click the joystick to go to the next menu.
- To erase the main menu
- To return to the previous menu
- 1 Press POWER to turn the TV on.
- 2 Press SET UP on the front of the TV.
- 3 Press CHANNEL+.
- 4 Press CHANNEL+.
- To preview the main functions (DEMO)
- 1 Press MENU.
- Press the joystick up or down to move the cursor (b) to SET UP and click the joystick.
- Make sure the cursor (W) is beside CHANNEL ERASE/ADD and click the joystick.
- Erase or add the channel you want:
- 5 To erase and/or add other channels, repeat step 4.
- 6 When you finish, press MENU.
- 1 Press MENU.
- 2 Press the joystick up or down to move the cursor (W) to SET UP and click the joystick.
- 3 Press the joystick up or down to move the cursor (W) to CABLE and click the joystick.
- 4 Press the joystick up or down to select ON or OFF and click the joystick.
- 5 Press MENU to return to the original screen.
- (AUTO SET UP)
- Selecting the cable box output channel
- Watching the TV
- Press TV FUNCTION on the remote commander.
- 2 Press TV POWER to turn on the TV.
- 3 Select the channel you want to watch:
- 4 Press VOL +/- to adjust the volume.
- Press JUMP.
- Press DISPLAY again.
- Press DISPLAY again.
- Press FREEZE. freeze
- Press SLEEP repeatedly until the time (in minutes) you want appears.
- Press TVA/IDEO repeatedly until the desired video input appears.
- Press ANT/AUX.
- Press Q.
- Press repeatedly to display a smaller window picture.
- Press 3-
- Press PIP TV/VIDEO to select the input mode.
- Press PIP CH +/-.
- Press AUDIO.
- Press POSITION.
- Press SWAP.
- Press FREEZE.
- 1
- 2
- Press MENU.
- Make sure the cursor is beside VIDEO and click the joystick.
- 3 Select the item you want to adjust.
- For example:
- 4 Adjust the selected item:
- 5 To adjust other items, repeat steps 3 and 4.
- To restore the factory setting
- 1 Press MENU.
- 2 Press the joystick up or down to select AUDIO and click the joystick.
- 3 Select the item you want to adjust.
- For example:
- 4 Adjust the selected item:
- 5 To adjust other items, repeat steps 3 and 4 above.
- Description of adjustable items
- To restore the factory settings
- 1 Press the joystick up or down to select SURROUND MODE or SUPER WOOFER MODE and click the joystick.
- t
- 1
- 2
- t
- Using the INPUT/ OUTPUT STATUS menu
- 1 Press MENU.
- 2 Press the joystick up or down to select INPUT/OUTPUT STATUS and click the Joystick.
- 3 Press the joystick up, down, right or left to select VIDEO LABEL and click the joystick.
- 5 Press the joystick up or down to select the label and click the joystick.
- Repeat steps 4 and 5 to label other input modes.
- 2 Press the joystick up or down to select TIMER and click the joystick.
- t
- f
- t
- 2 Press the joystick up or down to select TIMER and click the Joystick.
- 3 Press the joystick up or down to select ON/ OFF TIMER and click the joystick.
- Enter the ON/OFF TIMER setting.
- 5 To set another program, click the joystick and repeat step 4.
- To cancel the timer
- I Press MENU
- 2 Press the joystick up or down to select TIMER and click the Joystick.
- 3 Press the joystick up or down to select CHANNEL BLOCK and click the joystick.
- t
- Using the SET UP
- menu
- Z Press the joystick up or down to select SET UP and click the Joystick.
- 3 Press the joystick up or down to select CH CAPTION/LOGO and click the joystick.
- 4 Press 0-9 to select the channel that you want to caption.
- 5 Select LOGO or CAPTION.
- 6 Repeat steps 4 and 5 to set other favorite channels.
- 1 Click the joystick.
- 2 Press the joystick in the direction of the picture you want to select.
- 3 Click the joystick.
- 1 Press MENU.
- 2 Press the joystick up or down to select SET UP, and click the joystick.
- 3 Press the joystick up or down to select DIRECTION and click the joystick.
- Adjust the tilt of the picture.
- Displaying Caption Vision/XDS
- 2 Press the joystick up or down to select and click the Joystick.
- 3 Press the joystick up or down to select the caption type and click the joystick.
- To turn off the caption, text or XDS
- VCR manufacturer code numbers
- Set the slide switch inside the lid to the position you set for the video equipment.
- Use the video operating buttons on the remote commander to operate the video equipment.
- Operating a cable box or DSS receiver
- Troubleshooting
- No picture (screen not lit), no sound
- Poor or no picture (screen lit), good sound
- Good picture, no sound
- No color
- Only snow and noise appear on the screen
- Dotted lines or stripes
- Double images or ghosts
- Cannot operate menu
- Cannot receive upper channels (UHF) when
- using an antenna
- Cannot receive any channels when using cable
- TV
- Remote commander does not operate
- Specifications