ProTemp PT-30P-DDF-A - Manual (Page 9)

NEVER LEAVE A FAN
UNATTENDED WHILE
OPERATING OR WHILE
CONNECTED TO A POWER
SOURCE
© 2011, Pinnacle Products International, Inc. 9 HVF Air Circulator User’s Manual
30” FLOOR FAN -OPTIONAL CEILING MOUNT
Ceiling Mount Installation
The installer MUST be certain that the
ceiling that the mounting bracket is
mounted to is able to support 100 pounds continuously.
MOUNTING BRACKET INSTALLATION:
1. Remove Wheel Frame (item 15 on page 8).
2. Attach Cart Frame to Ceiling beam using U-bolts (item
5 on page 10).
3. Assemble and attach Ceiling Mount Assembly as
shown in figure 10 on page 10.
SAFETY CABLE INSTALLATION:
1. After the fan is securely mounted, feed the safety cable
between one of the swivel brackets as shown in figure
8.
2. Pull safety cable through and secure cable with safety
cable U-bolt as shown in figure 9.
3. Take other end of cable and wrap around beam
4. Secure cable loop as shown in step 2. Be sure there is
approximately 2 inches of slack in the safety cable
once both ends are secured.
5. Repeat on other side of fan so there are two safety
cables.
Figure 8: Safety Cable Installation
Figure 9: Safety Cable
Installation- Close Up
WARNING
1
3
5
6
7
8
9
2
4
Figure 10: Exploded View of PT-30-DDF (ceiling mount kit)
Item# Description Part Number
1 Safety Cable Assy 95-060-0100
2 Nut for Ceiling Swivel Pin 95-060-0180
3 Nut 95-060-0125
4 Upper Ceiling Bracket 95-060-0110
5 U-Bolt 95-060-0120
Ceiling Kit Replacement Parts
Item# Description Part Number
6 Top Washer 95-060-0120
7 Lower Ceiling Bracket 95-060-0160
8 Tapping Screw 5-15mm 95-060-0195
9 Ceiling Swivel Pin 95-060-0170
Ceiling Kit Exploded View