Granite Digital SATA LCD Hot-Swap - Manual (Page 9)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Page 9 DRIVE INSTALLATION
Installing the Drive
Reinstall the top of the tray. The side with the notch goes to the front.
When sliding the top into place, it will snap into its final position. You are
now ready to install the tray back into the Hot-Swap System.
The top slides on two rails and locks
into place. Make sure that both sides
are even when the top is slid on.
The top locks into place
when the tab at the front of the
tray clicks into place. Make
sure this tab is securely
fastened.