Canon mx860 - Manual (Page 791)

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1. Make sure that the machine is turned on, then press the Menu button.
2. Use the button to select Settings, then press the OK button.
3. Use the button to select Device settings, then press the OK button.
The Device settings screen is displayed.
4. Use the button to select a menu, then press the OK button.
5. Use the button to select a menu, then press the OK button.
The setting screen for the selected item is displayed.
6. Use the button to select a setting item, then press the OK button.
Plain paper feed settings
Page 791 of 997 pages Changing the Machine Settings on the LCD