Bio-Rad Bio-Plex Pro™ Wash Stations - Manual (Page 63)

Defining New Programs
Bio-Plex Pro and Bio-Plex Pro II Wash Stations 63
Bubble Sensor
It is recommended that the Bubble Sensor be left off.
BUBBLE SENSOR
- + EXIT OK
BUBBLE OFF
- + EXIT OK
Press OK to continue.
Press – or + to select between
OFF, LOW, MEDIUM and HIGH.
Press OK to confirm.
Procedures Menu
The Procedures menu has the following options:
Rinse Start rinse procedures.
Prime Start prime procedures.
Empty Prime Tray Aspirate liquid out of the prime tray.
Vacuum Filtration Prepare the vacuum pressure to prevent
delays during the running of a wash program.
The Procedures menu has the following structure:
RINSE
< > EXIT OK
PROCEDURES
< > OK
PRIME
< > EXIT OK
EMPTY PRIME TRAY
< > EXIT OK
VACUUM FILTRATION
< > EXIT OK
Rinse
For details, see the Rinse section on page 24.
Prime
For details, see Priming the Instrument on page 20.
Empty Prime Tray
Navigate to empty EMPTY PRIME TRAY in the Procedures and Press OK. The
prime tray will be aspirated.