Baseline Systems BaseManager 2.0 - Manual (Page 5)

BaseManager 2.0 Server Configuration Guide
Introduction
When you purchase the self-hosted BaseManager 2.0 server, Baseline provides the following items:
• Intel™ Next Unit of Computing™ hardware (the BaseManager server hardware) with the
BaseManager 2.0 server software preinstalled
• Power adapter and cord
• DVI to HDMI cable
To configure the server, you need to provide the following items:
• Monitor with a DVI port
• Keyboard and mouse with USB connectors
• Ethernet cable
Hardware Setup
1. Remove the BaseManager server hardware from the packaging.
2. Connect the power adapter to the back of the box and plug the cord into power.
3. Connect the Ethernet cable to the back of the box and plug the other end of the cable into a
live Ethernet port on the desired network.
4. Plug the USB connectors from the keyboard and the mouse into the USB ports on the back of
the box.
5. Using the provided DVI to HDMI cable, plug the HDMI connector into the HDMI port on the
back of the box and the DVI connector into the DVI port on the monitor.
6. Press the power button on the top corner of the box.
7. Continue to the BaseManager 2.0 Server Configuration steps.
Note: You can mount the BaseManager server hardware to a wall or a rack with the mounting
plate and screws that are included.
1