Install new agitators, Mount blades, Skip to step 24 – Great Plains Series II Native Grass Agitator User Manual
Page 5
Great Plains Mfg., Inc.
Installation Instructions
5
04/11/2007
202-599M
Install New Agitators
Mount Blades
24. Pick a starting feeder cup row that is not adjacent to
a seed box partition (to assure a starting example
using all four blades).
25. Select one each new:
202-281D LH NG SERIES 2 AGITATOR
802-448C HFSS 1/4-20 X 2 GR5
803-088C 1/4-20 FLANGE HEX LOCK NUT
26. Position the (black, fan-shaped) Left Series II agitator
to the left of a feeder sprocket
. The slot in the
agitator fits over the drive shaft
. The short side of
the “U” bend faces the sprocket.
27. Loosely attach the agitator to the shaft with a screw
and nut
28. Rotate the shaft 180
°.
29. Select one each new:
202-280D RH NG SERIES 2 AGITATOR
802-448C HFSS 1/4-20 X 2 GR5
803-088C 1/4-20 FLANGE HEX LOCK NUT
30. Position the (plated, fan-shaped) Right Series II agi-
tator
to the right of the Left agitator
placed. The slot in the agitator fits over the shaft. The
short side of the “U” bend faces the sprocket. Align it
on the opposite shaft faces from the Left agitator.
31. Loosely attach the agitator to the shaft with a screw
and nut
32. Select one each new:
202-281D LH NG SERIES 2 AGITATOR
802-448C HFSS 1/4-20 X 2 GR5
803-088C 1/4-20 FLANGE HEX LOCK NUT
33. Rotate the shaft 180
°. Position a Left agitator
the left of the previous Left agitator
(away from the
sprocket
). The short side of the “U” bend faces the
sprocket. Loosely assemble.
34. Select one each new:
202-280D RH NG SERIES 2 AGITATOR
802-448C HFSS 1/4-20 X 2 GR5
803-088C 1/4-20 FLANGE HEX LOCK NUT
35. Rotate the shaft 180
°. Position a Right agitator
to
the right of the previous Right agitator
(away from
the sprocket
). The short side of the “U” bend faces
the sprocket. Loosely assemble.
Figure 6
Agitator Inside Blades
(viewed from back of drill)
25126
2
1
13
Figure 7
Agitator Outside Blades
(viewed from back of drill)
25127
2
3
1