K-array KP102 - Manual (Page 8)

KP52/KP102
REV. A 8
4. UNPACKING
Each K-array loudspeaker is built to the highest standard and thoroughly inspected before leaving the factory.
Upon arrival, carefully inspect the shipping carton, then examine and test your new loudspeaker. If you find any
damage, immediately notify the shipping company. Only the consignee may institute a claim procedure regarding
the system’s electronic equipment.
5. WARRANTY
K-array systems are warranted against manufacturing defects in materials or craftsmanship over a period of 2
years from the date of original purchase. During the warranty period K-array will, at its discretion, either repair or
replace products which prove to be defective provided that the product is returned in its original packaging, shipping
prepaid, to an authorized K-array service agent or distributor. K-array cannot be held responsible for defects caused
by unauthorized modifications, improper use, negligence, exposure to inclement weather conditions, acts of God
or accidents, or any use of this product that is not in accordance with the instructions provided by K-array. K-array
is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
6. SAFETY
WARNING
• Only install the speaker in a location that can
structurally support the weight of the unit. Doing
otherwise may result in the unit falling down and
causing personal injury and property damage.
• Professional loudspeakers are capable of
producing extremely high sound levels and should
be used with care. Hearing loss is cumulative and
can result from extended exposure to levels in
excess of 90dB.
• Do not operate the speaker for an extended period
of time with the sound distorting.This is an indication
of malfunction, which can cause heat build-up and
result in a fire.
• Never stand close to loudspeakers driven at high level.
• Suspending the system should only be done by
qualified personnel, following safe rigging practices.
Secure fixings to the building structure are vital.
If there is any doubt, seek professional help from
architects, structural engineers or other specialists.
• No open flame sources, such as lighted candles,
should be placed near the device.
• Do not attempt to disassemble the unit. The unit
contains no user serviceable parts. Repairs should
be performed only by factory trained service
personnel.