Specifications kp52 – K-array KP102 User Manual
Page 20
KP52/KP102
REV. A
20
14. SPECIFICATIONS
KP52
Acoustics
Speakers power handling
360 W
(AES)
Max power
600 W
1
Impedance
8Ω or 32Ω (selectable)
Frequency range
100 Hz - 20 KHz.
SPL 1W / 1mt
96 dB
2
Maximum SPL
118 dB continuous - 124 dB peak
Coverage
Horizontal
90°
Vertical
10°- 45° (selectable)
Crossover
Type
External Crossover required
Frequency
High pass @100 Hz, 24 dB/oct suggested minimum
Transducers
Full range
6 x 3.15” Neodymium magnet with 1” voice coil
Power Audio Input
Connectors
2 x 4-pin Speakon
Wiring
1+ 1-
(signal IN & LINK);
2+ 2-
(through)
Selection Switch
Vertical pattern
Spoot - Flood
Impedance
8Ω - 32Ω
Physical
Dimensions
8.8 x 50 x 11.8 cm (3.56” x 19.7” x 4,65”)
Weight
6 kg (13.23 lbs)
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing products
without previous notice. Present systems may differ in some
respects from those presented in this brochure.