Barco D-ILA LX-5 - Manual (Page 39)

39
Q indicates the factory default
Item Setting Value Description
E-Mail Setting For configuring the e-mail feature.
E-Mail
Q
ON
OFF ON : Use the mail feature.
OFF : Do not use the mail feature.
E-Mail
Address —
(Default Value: user@localhost) For specifying the destination e-mail address.
NOTE:
● Specify an address up to a maximum of 64 characters.
● Make use of single-byte alphanumeric characters, “-”, “.”, “_”,
and “@”.
SMTP Server
Address —
(Default Value: 1.1.1.1) For specifying the address of the outgoing mail server.
NOTE:
● Specify an address up to a maximum of 15 characters.
● Make use of numbers and “.”.
E-Mail Auth.
Q
ON
OFF ON : Enable the e-mail authentication feature.
OFF : Disable the e-mail authentication feature.
Auth. Type Q PLAIN
LOGIN
CRAM-MD5
For configuring the e-mail authentication type.
PLAIN : Set e-mail authentication to APLAINB.
LOGIN : Set e-mail authentication to ALOGINB.
CRAM-MD5 : Set e-mail authentication to ACRAM-MD5B.
Auth. User
Account — For configuring the account name during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and “-”.
Auth.
Password — For configuring the password during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and “-”.
Port No. Q 25
465
587
For configuring the SMTP server port number.
Test Mail — When the ASENDB button is clicked, the test mail with the
contents configured in the E-Mail Setting will be sent.
LX-5_EN.book Page 39 Friday, July 4, 2008 9:35 AM