Metrohm Wall-Jet-Cell - Manual (Page 26)

6.1 General
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20 ￭￭￭￭￭￭￭￭
IC equipment Wall-Jet cell
6 Technical specifications
6.1 General
Structure Flow-through cell with working, reference and auxiliary electrode.
Material Cell body made of PEEK.
Cell volume Dependent on the thickness of the spacer:
for 3 mm work-
ing electrode
and 50 µm
spacer < 0.35 µL
for 2 mm work-
ing electrode
and 25 µm
spacer < 0.1 µL
Maximum operat-
ing pressure 0.4 MPa (100 psi)
Cell recognition Intelligent cell with automatic identification and monitoring.
Auxiliary electrode
Type Installed
Material Stainless steel
Reference elec-
trode
Type Replaceable
Material ￭ Palladium solid-state electrode
￭ Ag/AgCl gel electrode