Page 13 – Blizzard Lighting Weather System COB User Manual

Page 13

Page 13

Weather System COB User Manual Rev. A

Sound Active Mode:

1.) To use this fixture in sound active mode, scroll to SU-- using the

button. Then using the buttons, choose the built-in sound active

chase pattern. Adjusting the settings from SU01 - SU31 will adjust the built-in

microphone sensitivity level (low <--> high).

Manual Color Adjustment:

Allows the user to adjust the color balance of the fixture. These settings are global, they

will effect all modes.

1.) Use the button to navigate to Colr and hit the button.

2.) Now you can navigate to r255, 9255, or b255 and use the <UP/DOWN>

buttons to adjust the global intensity of red, green, or blue from 000 - 255.

The Weather System COB™ Foot Switch Controller

Pedal 1 - Auto Run

When you step on pedal 1 on the foot controller, it will set your fixtures to run in
auto mode. To step on petal 1 again from here, it will skip to the next program (2-
14), and then continue to run the programs in sequence from that point.

Pedal 2 - Sound Active

When you step on pedal 2 on the foot controller, it will set your fixtures to run in
sound active mode. The built-in microphone sensitivity settings are adjustable from
the LED control panel menu.

Pedal 3 - Freeze

When you step on pedal 3 on the foot controller, it will freeze/suspend the currently
running program. Step on pedal 3 again, and the Weather System COB™ will con-
tinue running the suspended program.

Pedal 4 - Blackout

When you step on pedal 4 on the foot controller, it will blackout the currently run-
ning program. Step on pedal 4 again, and the Weather System COB™ will continue
running the program where it left off.